Longleaf 522 Mortar Mix Type S

Description

Longleaf 522 Mortar Mix Type S - a preblended engineered mix of high grade professional quality sand and masonry cement.

Features & Benefits:

• High strength - 1,800 psi when tested in accordance in a lab. Note: There is not a minimum strength for field tested mortars.

• For projects requiring structural strength for brick and block foundations.

• Applications from 1/4" (6 mm) to 1/2" (13 mm)

Application:
• Laying brick
• Laying block
• Laying stone
• Walls
• Chimneys
• Tuck pointing & repairs

Water Coverage/Yield:
1.25 gallons for each 80 lb. bag
80 lb bag will lay approximately:
- 12 each 8" concrete block
- 35 each standard bricks
One 3,000 lb bulk bag will lay approximately:
- 450 8" concrete blocks
- 1,350 standard bricks

Technical Information:
ASTM International
• ASTM C270 Specification for Mortar for Unit Masonry

Mixing Instructions:
Pour 80 lb. bag into wheelbarrow or mortar pan. Form a crater in the center of the dry mix for the addition of clean potable water. For multiple bags mix with a mechanical mixer. For best results the mortar mix should be mixed for 5 minutes, let rest for 2 minute and then mixed again for an additional 2 minutes.

For silo mixing: Use the same approximate water ratio and follow same procedures. Mix to a workable mix. Add more water if needed. Avoid a ‘soupy’ consistency. Excess water reduces strength and durability and may cause cracking. For consistency of finish and color, joints should be struck with consistent timing, avoiding early or late tooling.

Curing:
In hot or windy conditions keep the mortar damp for curing.
Wall should be protected and covered to retain moisture.

Caution:
Air, mix and substrate temperatures should be between 40°F (4°C) and 90°F (32°C) Should be no rain in the forecast for 24 hours of application. Do not over trowel or overwater. Protect from freezing for 24 hours. NOTE: Proper application and installation of all Longleaf products are the responsibility of the end user.

Safety:
Read and understand all the information on the Safety Data Sheet (SDS) before using this product. WARNING: Wear protective clothing and equipment. KEEP OUT OF REACH OF CHILDREN.

Limited Warranty:
The manufacturer warrants that this product shall be of merchantable quality when used or applied in accordance with the manufacturer’s instructions. This product is not warranted as suitable for any purpose other than the general purpose for which it is intended. For more warranty information, contact the Longleaf Packaging office.

Bulk Bag Product Flyer

Longleaf Product Guide

Rates

Please contact us for current pricing and availability.